A pool is great to have—until something stops working. If the water isn’t staying clean, the pressure seems off, or strange noises start coming from your system, it could mean there’s a problem. Pool equipment doesn’t last forever, and catching issues early can save you a lot of time and money.
If your pool isn’t working as it should, here are the most common signs that your system might need repairs.
Weak or No Water Circulation
Water needs to keep moving for your pool to stay clean. If you notice weak water flow or still water, something could be wrong with the system.
A blockage might be stopping the water from moving properly. This could be a clogged filter, a dirty skimmer basket, or even something stuck in the pipes. If cleaning these parts doesn’t fix the issue, the problem could be with the pump or motor, which might need professional repair.
Water Isn’t Staying Clean
If your pool is turning green, cloudy, or full of debris, even when you’re adding chemicals and cleaning regularly, there could be a deeper problem.
Filtration is one of the most important parts of keeping a pool clean. If the filter isn’t working right, it won’t trap dirt, bacteria, and algae, leading to dirty water. Sometimes, a simple cleaning or filter replacement can fix the issue. Other times, the whole system might need a closer look.
Strange Noises Coming from the Equipment
Pool systems aren’t silent, but they shouldn’t be making loud grinding, screeching, or rattling sounds. If you start hearing strange noises, it usually means something is wearing out or coming loose.
Grinding or screeching could mean the motor bearings are failing. Rattling might mean parts inside the pump are loose. In this case, seeking pump repairs perth is a good idea. A humming noise with no actual movement could mean the motor is struggling to start. If the noises don’t stop, it’s best to get the system checked before it breaks completely.
Air Bubbles in the Water
If you see air bubbles coming from the return jets, air might be getting into the system. This isn’t normal and can cause the pump to lose efficiency or overheat.
Air usually gets in through a leak somewhere in the system, like a loose connection, a cracked pipe, or a faulty pump lid. If the problem isn’t fixed, it can lead to more serious damage over time.
Leaks or Water Loss
Pools lose some water naturally through evaporation, but if the water level is dropping faster than usual, there could be a leak in the system.
Leaks can happen in the pipes, filter, or even the pump. If you notice wet spots around the equipment or puddles forming near the system, it’s a sign that something needs repair. Leaving a leak for too long can waste water and increase energy costs.
Rising Energy Bills
If your energy bill is suddenly higher than normal, your pool system could be working harder than it should. When equipment starts to fail, it often uses more power to do the same job.
A clogged filter, a struggling motor, or a leak in the system can all cause higher energy use. If your bill is going up but nothing else in your home has changed, it might be time to have the pool system checked.
Issues with the Pool Heater
If you have a pool heater but the water isn’t warming up properly, there could be a problem with the heating system.
A dirty or clogged filter can reduce water flow, making it harder for the heater to work. A failing thermostat or a broken heating element can also stop the heater from doing its job. If the water stays cold no matter what, the heater might need repairs or replacement.
Pump Keeps Turning On and Off
The pump is the heart of your pool system. If it’s turning on and off repeatedly, something is wrong.
This could be caused by electrical issues, overheating, or a clogged impeller. If the pump doesn’t run long enough, it won’t circulate the water properly, leading to poor filtration and dirty water. Getting it checked early can prevent bigger problems later.
When to Call a Professional
Some pool issues have simple fixes, like cleaning a filter or replacing a worn-out O-ring. But when problems keep coming back or the equipment isn’t working at all, it’s time to get professional help.
If you need pump repairs, working with a reliable repair service can save you from costly replacements and get your pool running smoothly again.
Keeping Your Pool System in Good Shape
Regular maintenance is the best way to avoid expensive repairs. Cleaning the filter, checking for leaks, and making sure all parts are working properly can help keep your pool system in top condition.
Catching problems early can save time, money, and frustration. If your system isn’t working the way it should, getting it checked sooner rather than later can prevent a small issue from turning into a big repair.
